| ||
| *** Please Note: Shipping is included if you are in the 48 connected States. If you are located outside the 48 states, please email me with your purchase request I will send you a price with shipping. | ||
| *** Please be aware that few of the items shown below are kept in stock, most are produced after an order is placed. As such, please allow at least 7-10 days for single/small orders to be produced and shipped. Large orders will take longer. | ||
| *** I am always willing to reproduce new paperwork not shown below. If you have something no other vendor is offering that you would like reproduced, please feel free to contact me and let me know what you have. | ||
| American Items | ||
| WWI AEF Paybook w/ Sleeve |  |
$18.00 |
| WWI AEF ID Card |  |
$4.00 |
| WWI AEF Gas Card |  |
$20.00 |
| WWI AEF Soldier's French Phrase Book |  |
$18.00 |
| German Items | ||
| WWI German Soldbuch (Based on an original issued to a Prussian Soldier). |  |
$18.00 |
| WWI German Soldbuch (Based on an original issued to a Bavarian soldier). |  |
$21.00 |
| WWI German Soldbuch Sleeve |
|
$5.50 |
| WWI German Schießbuch. |  |
$14.00 |
| WWI German Militärpaß (Based on an original issued to a Prussian soldier). |
|
$17.00 |
| WWI German Militärpaß (Based on an original issued to a Bavarian soldier). |
|
$18.00 |
| WWI German Gas Mask Can Instructions |  |
$3.00 |
| WWI German Delousing Certificate |  |
$2.00 |
| French Items | ||
| WWI French Livret Militaire |  |
$41.00 |
| Austrian Items | ||
| WWI Austrian Militärpaß |
|
$32.00 |
| WWI Austrian VD Warning Pamphlet |  |
$7.00 |
|
Make Money Orders payable to:
Randall Chapman *** Paypal Accepted! *** Email: Randall Chapman |
||
|
Available now 3D printed steel MG08/15 steam ports! These steamports are fully functional, they mount to the gun as they should, rachetting on and will function as originals. The standard hose coupling will attach. 3D printing is not precise, so the parts will have more play than the original, but this will not affect function. Due to a recent 200% price increase by the manufacturer, I can no longer afford to buy these at my cost and resell. I was making very little profit on these, but the price increase is probably going to make these untouchable. Cutting cost even further, the price from now on will have to be $445 including shipping to the connected 48 States, and I will need a $200 deposit before I can order the parts. USPS Money order preffered, but will accept Paypal if buyer covers all the fees. I do not accept FB payments or Venmo. The photos below show some bare metal finish parts, but all parts now will be an oiled-bronze/black finish.
The alloy used is a steel alloy, they lay down the model in a stainless steel powder and infuse and bind it with bronze, it is strong and the part is functional. You can read about it here: Email: Randall Chapman |
||
|
Available NOW - 3D printed steel MG08/15 Drum Hangers! The 3D printed alloy is a stainless steel/bronze and I had the steel spring lock added by a fabricator. See pictures. Original drum hanger shown in one picture is not for sale and not included, it is shown for comparison value only. This is fully functional, but 3D printing is not like machining, the parts have a little more play than a finely machined part, but for this support bracket this is unimportant. I just thought that some of you might want to be aware. It is not and exact match for an original, but it is as close as I can make it with this process. I currently have three of these, one is an oiled bronze, one is a rough matte black, and one is a satin/blue appearance. These can be purchased directly from me, cost is $485 including shipping to the 48 Connected States only. USPS Money order preffered, but will accept Paypal if buyer covers all the fees. I do not accept FB payments or Venmo. Due to a recent 200% price increase by the manufacturer, The three mentioned above will be the last I will make. -->
|
||
|
Available NOW - Imperial German Gamaschen Hooks! 
These are laser cut out of 1.2mm carbon steel plate, and have already been bent. They are painted gray and will be shipped with copper pins so all you have to do is cut the rivet stem to length and peen them onto your gemaschen. A pair shipped to you in the connected 48 States is only $11 shipped.
|
||
|
Available NOW - Imperial German Belt Hooks/keepers! 
These are laser cut out of 1.2mm carbon steel plate, and have already been bent. They will be painted gray before shipping. One shipped to you in the connected 48 States is only $11 shipped.
In the pic at right, the hook to the right of the grouping is an original for reference. |
||
|
Available NOW - German WWI Cardboard Ammo Boxes! The are commercially available bulk cardboard boxes that are similar to WWI 15 round ammo boxes. The are slightly shorter, and slightly narrower than originals, so they will not hold live rounds, but they will hold 15 blanks on strippers so you can pack them in your Tornister or put them on a shelf in your bunker until you need them. These will be shipping in their broken down condition. There is a make logo impressed into the bottom, but the typical manufacturer's label can be glued over this. I have a couple of different styles of label I can print and attach for you to chose from, or I can print any label you wish to use, or you can attach your own - your choice. These boxes are 45 cent each which will include the labels, but actual shipping will be calculated based on your location and I will try to keep it as low as possible.
|
||
|
Available NOW - 3D printed scale model MG08 with sled and armor! The more inexpensive hard durable ABS plastic is the most economical, but will lack detail, the fine detail plastic is much more expensive and not as durable. In most cases you can buy the components in white, black, or fine detail which is translucent. These had to be broken up into pieces that you will have to glue together and paint, so make sure you order all of the parts to make each piece - any questions email me Randall Chapman These can be purchased at my Shapeways Store here:
Email: Randall Chapman | ||
